-
What Types of Ductile Iron Pipe Restraints Should Be Used When Installed Through Casing Pipe?
03/12/2021 In Installation Products TechnicalAs a companion piece to the Iron Strong Blog entry, What Type of Ductile Iron Pipe Joint Is Right for You? by Scott Rhorick, this article takes a deeper dive into the specifics of installing restrained joint Ductile iron pipe (DI pipe) through a steel casing pipe. While many options are available industry-wide, this article concentrates on using TR Flex® or Sure Stop Gaskets in cased installations.
-
What Type of Ductile Iron Pipe Joint Is Right for You?
03/08/2021 In Installation Products TechnicalThere are a variety of Ductile iron pipe (DI pipe) joints on the market. These different types of joint designs can now allow for additional benefits for various applications. Joining pipe together is just as important as the pipe itself. It sounds like a simple procedure, but the environment in which the pipe is assembled is critical.
-
What is Autogenous Healing of Ductile Iron Pipe? Are Small Cracks and Cobwebbing Acceptable?
02/05/2021 In Products TechnicalSeeing cobwebbing or small cracks in the cement lining of Ductile iron pipe (DI pipe) may raise concern for some and over the years, I’ve had some folks ask me, “Is this acceptable?” And my response is, “Yes, it is, at least to some degree.” Within this Iron Strong Blog, we will discuss Autogenous Healing (au-tog-e-nous), which is defined as the natural process of crack repair that takes place when cement linings come in contact with water.
-
Can Ductile Iron Pipe Be Ordered in Shorter Bell and Spigot Lengths?
01/29/2021 In Installation Products TechnicalHave you ever wondered or asked if it is possible to order shorter lengths of bell and spigot Ductile iron pipe (DI pipe) for your waterworks project or sections within it? The answer is YES; we can help you with those shorter lengths of DI pipe for your project.
-
Does McWane Ductile Manufacture TR Flex® Pipe Differently than U.S. Pipe?
01/08/2021 In ProductsOver the last several months, I have encountered a few municipalities that have asked the question, does McWane Ductile manufacture TR Flex Restrained Joint Pipe differently than U.S. Pipe?
-
What Is No Bell Pipe and What Is It Used For?
12/10/2020 In Installation Products TechnicalWhy do you make Ductile iron pipe with no bell? Who would use such pipe? What is it used for? All good questions from most people in our industry, unless you are a pipe fabricator.
-
What Are Some Common Misconceptions Associated with Ductile Iron Pipe?
12/04/2020 In Products TechnicalIn 1492, Christopher Columbus was shocked when his ship made landfall in a land Europeans had never explored. Along the way, he proved that Earth isn’t flat after all. Right?
Wrong: Despite a persistent legend, neither Columbus nor his Spanish patrons thought Earth was a finite plane instead of a round planet. That was thanks to scientists, philosophers, and mathematicians who, as early as around 600 B.C., made observations that Earth was round. Using calculations based on the sun's rise and fall, shadows, and other physical properties of the planet, Greek scholars like Pythagoras and Aristotle determined that the planet is actually a sphere.1
So, what’s the point of today’s history lesson? It often reminds me that there are numerous myths associated with Ductile iron pipe (DI pipe), and in this Iron Strong Blog, we’ll list some of those ideas, provide factual data, and discuss why they are simply misconceptions.
-
Why Should I Use Pipe Lubricant Supplied by the Pipe Manufacturer?
11/20/2020 In Installation ProductsFirst, let us establish that all Ductile iron pipe, whether using push-on joints such as Tyton Joint® and TR Flex® Restrained Joints or Mechanical Joint pipe requires the gasket to be properly lubricated prior to joint assembly. Secondly, there is no such thing as too much lube when appropriately applied, especially when using McWane Sure Stop Restraining Gaskets. In this Iron Strong Blog, we will focus on why it is recommended to use the lubricant supplied by the pipe manufacturer.
-
CUSTOMER SPOTLIGHT: Piecing it Together with Peace River
11/13/2020 In Installation Our Company ProductsPeace River Manasota Regional Water Supply Authority has been in operation since 1991 and provides drinking water to more than 900,000 people throughout Charlotte, Desoto, Manatee, and Sarasota Counties in Florida. The Integrated Loop System Phase 1 Interconnect Project was bid in late 2018 and began in early 2019.
-
Can a Sure Stop 350® Restrained Joint Gasket Be Used for Horizontal Directional Drilling?
10/01/2020 In Installation Products TechnicalThose involved in the construction of water and wastewater pipelines are probably aware of the installation methodology of Horizontal Directional Drilling (HDD). HDD is a trenchless technique that provides an installation alternative offering several benefits over traditional open-cut. HDD can be implemented with minimal disruption to surface activities, requires less working space, and can be performed more quickly than open-cut methods. HDD can be used to install new pipelines or replace existing ones. Also, it can simplify or eliminate certain permitting processes. Although there are currently no national standards regarding HDD installations of municipal underground infrastructure systems, HDD has seen a dramatic increase in recent years and is becoming more common for any pipe material. HDD may be the fastest-growing trenchless construction method today.
Latest Posts
- Crossing the Saugus River with Ductile Iron Pipe - When, Why, Who, and How 04/15/2025 In Installation Products Technical
- Why Would High Temperatures Affect Piping Material Selection? 03/25/2025 In Products Technical
- Young Water Professionals - A Guide to Success 02/14/2025 In Career Resources
- Is Resiliency an Overutilized Term? Not to Some. 02/06/2025 In Products Resiliency