Question – What is the difference between Ductile Iron and Polyvinyl Chloride (PVC)? Answer – Many things, but some groups may attempt to “muddy the waters” with inaccurate information regarding the two materials.
With the information that follows, we will take a closer look at what really separates Ductile Iron from PVC and why it matters.
Got Certification? Does your fabricated Ductile iron pipe meet the current ANSI/AWWA C115 / A21.15-11 Standard for fabricated pipe?
Products intended for contact with potable water shall be certified to the requirements of NSF/ANSI 61. The certification shall be accomplished by a certification organization accredited by the American National Standards Institute (ANSI) AWWA Standard, ANSI/AWWA C115/A21.15-11 Section 4.1.2. This standard includes water service pipe, water distribution lines, water treatment plants (WTP), and commercial and industrial services lines.
One question we often receive in the field is, "Can you use Ductile iron pipe (DI pipe) when running hot water or steam through pipe?" The answer to that question is YES, but there are several factors you must consider. For this Iron Strong Blog, we are going to look at these factors to help determine what products are needed for each application.
What is the maximum internal pressure Ductile iron pipe (DI pipe) can handle, you ask? The simple truth is it depends entirely upon the size of the pipe and its wall thickness. And within any given DI pipe diameter there can be as many as 12 correct yet different answers, given the wide range of intermingled thickness class and pressure class pipe selections available.
Recently, there have been multiple unsuccessful attempts by plastic pipe manufacturers and their trade associations to have legislation passed, mostly on the state level, requiring utilities to specify plastic pipes on their projects.
This legislation is a subject worth exploring deeper as it is being promoted by supporters of plastic and their lobbyists as a fiscally responsible requirement. Still, it provides no consideration for the many variables required in material selection or pipeline design; all are completely ignored in the proposed legislation which would ultimately be an "initial price only" comparison.
One of the more frequent questions we receive in the field is, “What is the size of a piece of Ductile iron pipe?” But that question may apply to the Outside Diameter (OD) or Inside Diameter (ID) of a piece of pipe. For this Iron Strong Blog, we are going to look at a particular size of pipe to help us understand why the OD and ID’s are important to you. We will be using 24 inches as our example pipe size.
Every summer, I go backpacking with my family into the Uinta Mountains of Utah. The Uinta mountain range is enormous, very remote, and extremely beautiful. One of the most scenic areas in the entire range is called Red Castle. In this area of the Uintas rises a towering red monolith with peaks that reach straight into the sky, hence the name. Getting there requires a grueling 10-mile trek, but the beauty and serenity are well worth the effort...
I have given several presentations wherein I have identified the distribution system of a water utility as The Forgotten City: Out of Sight, Out of Mind. Although the most significant capital investment for a water system is its pipeline infrastructure, many times, it gets less attention than other components such as pumps, motors, plant structures, pump stations, and even fire hydrants, all of which are visible to the eye. One mysterious component to some water utilities is Unaccounted for Water. Some say that, like death and taxes, Unaccounted for Water will always be present, with the only issue being the degree to which it pervades.
Why all these different numbers when ordering flanges? Why can’t it be easy? Often, people get confused about the proper terminology and usage of Ductile Iron flanges versus steel flanges. We are often asked, “Why are there two different Ductile Iron flanges?” The truth is they can all be mated together if ordered correctly.
I have been on the road for nearly 20 years, talked with numerous contractors and distributors during that time, and there is a common question that I often get asked, "Why do Ductile iron pipe lengths vary?"
In a continuous effort to make your job easier, we have developed an online submittal builder to quickly and neatly package your personalized presentation.
BUILD MY SUBMITTAL
Looking for answers to your DI pipe questions? Find decades of Ductile iron expertise with installation guides, videos, tip sheets, training resources, and more in our Learning Center.
GIVE ME ANSWERS
Stop struggling with those hard-to-figure field calculations and put ease and efficiency right at your fingertips with our Pocket Engineer for mobile and desktop devices.
CALCULATE NOW
McWane Ductile is proud to be a part of the McWane family of companies.
