After being in the water and sewer industry for almost 15 years, I can safely say a question I hear frequently is “Can Protecto 401™ be used in potable water service applications?” And that is exactly what we are going to talk about in this Iron Strong Blog. We all know it when we see it, the pipe with the red bell and spigot. It sticks out like a sore thumb so that it can be noticed without any confusion. But where can it be used and what is its purpose?
If you're like most people, you probably don't sit around thinking about how much Ductile iron pipe (DI pipe) weighs so in this Iron Strong Blog we are going to tell you where to find the weight of the pipe and why it is essential to familiarize yourself with the weight of the pipe.
Over the years, I have spoken with numerous engineers, utilities, and municipalities, and there seems to be a disconnect when it comes to the overall understanding of when and where cement-mortar-lined pipe can be used in wastewater applications. Due to these grey areas, engineers and owners often specify specialty linings for an entire project when the line could have been specified as either cement-mortar lined ductile iron pipe only or a mixture of specialty lined and cement-lined pipe.
A common question that many sales reps in the Ductile iron pipe (DI pipe) industry have heard over the years is, "Are you sure you’ve quoted the 3” and 4” pipe correctly?” Once that price is confirmed, the follow-up question from the customer is usually “Why in the world does it cost so much?” Well, there are many reasons for the higher cost, and in this Iron Strong Blog, we will offer some insight into that question.
Question – What is the difference between Ductile Iron and Polyvinyl Chloride (PVC)? Answer – Many things, but some groups may attempt to “muddy the waters” with inaccurate information regarding the two materials.
With the information that follows, we will take a closer look at what really separates Ductile Iron from PVC and why it matters.
In this second installment of our Iron Strong Blog on Sustainability and Resiliency, we will focus on recycling and the recyclability of various pipe materials. As you may know, Ductile iron pipe is made from recycled iron and steel scrap, making it not only a recycled product but a recyclable product.
Okay, since that fact has been stated, why read further? Well, besides being the only primary full-size-range piping product made from recycled material, you should know why this is important to you, me, and everyone else. We will look at the impact of recycling on cities and towns as well as countries and the planet.
Sustainability and Resiliency are today's buzzwords, especially concerning water and wastewater systems, but what does this really mean to you, the designer, manager and/or operator? Utility people today are bombarded with the answer to this question, and we believe that there is no one answer because every system is unique and experiences different priorities and different challenges.
As the name suggests, Long-Span pipe can extend over distances with fewer supports than conventional Ductile iron pipe (DI pipe). In standard 18-foot lengths of DI pipe, a minimum of one support is required within 2-feet of the Bell for each length of pipe. When using Long-Span pipe, distances of 27-foot up to 45-foot and longer can be achieved with support only at the Bell ends.
Every summer, I go backpacking with my family into the Uinta Mountains of Utah. The Uinta mountain range is enormous, very remote, and extremely beautiful. One of the most scenic areas in the entire range is called Red Castle. In this area of the Uintas rises a towering red monolith with peaks that reach straight into the sky, hence the name. Getting there requires a grueling 10-mile trek, but the beauty and serenity are well worth the effort...
Why all these different numbers when ordering flanges? Why can’t it be easy? Often, people get confused about the proper terminology and usage of Ductile Iron flanges versus steel flanges. We are often asked, “Why are there two different Ductile Iron flanges?” The truth is they can all be mated together if ordered correctly.
In a continuous effort to make your job easier, we have developed an online submittal builder to quickly and neatly package your personalized presentation.
BUILD MY SUBMITTAL
Looking for answers to your DI pipe questions? Find decades of Ductile iron expertise with installation guides, videos, tip sheets, training resources, and more in our Learning Center.
GIVE ME ANSWERS
Stop struggling with those hard-to-figure field calculations and put ease and efficiency right at your fingertips with our Pocket Engineer for mobile and desktop devices.
CALCULATE NOW
McWane Ductile is proud to be a part of the McWane family of companies.
